Jump to content


CO2 unit cooler MTE
Air flow scheme
Performance ranges
  • Cooling capacity: from 0,79 to 4,53 kW *
  • Airflow: from 600 to 2.840 m3/h
  • Brine coolers and CO2 coolers: customized on demand
  • High heat exchange efficiency
  • Manufactured with special profile aluminium fins and inner grooved copper tubes
Coil features According to the room temperature, the employed fin spacing is the following:
- MTE H4 for high temperatures (>= +2 °C): 4,0 mm
- MTE L7 lower temperatures (>= -25 °C): 7,0 mm, (electric defrost version ED is recommended)
Standard defrost Electric (ED) 230V/1/50-60Hz
Casing features Made of a magnesium aluminium alloy, with a smooth finish covered by a plastic protection film
Fan motor features
  • Diameter: 250 mm
  • Single-phase, with shaded poles
  • Voltage: 230V/1/50-60Hz
  • Protection grade: IP 44
  • Maximum operating temperature: +40 °C
  • Inner thermal contact protection
  • Quick cable connections
Fan guard features Manufactured from fibreglass charged polyamide, according to EN 294 standards
Air throw The aeraulic combination grants a considerably high air throw, measured in Luvata’s Technical Lab according to CECOMAFGT6-001 standards
Testing Heat exchangers are supplied clean and tested
Miscellaneous All the fan motors and electric heaters are connected in separate terminal boxes, with IP 54 protection grade
* Nominal capacity: assessed in practical operating ambient, i.e. wet conditions; refrigerant R404A; air inlet temperature = 0 °C; evap. temperature = -8 °C; ΔT = 8 K

Luvata Heat Transfer Solutions division

Important Notice

On 30th of November 2016, Luvata Heat Transfer Solutions (HTS) Division was purchased by Modine Manufacturing Company. All information on this page is the property of Modine Manufacturing Company.

For the convenience of customers, these pages will continue to be hosted by Luvata while transition work continues.

These pages will transfer to www.modine.com on 31th May 2017.

Visit www.modine.com for more details.

Copyright © 2017 Luvata. All rights reserved.