Jump to content


The QDHF Coils with 15 mm copper tubes and aluminium fins are designed for heating or cooling of air by means of water,
oil or other liquid.

  • Copper tubes and aluminium fins. The headers and connections are made of steel and are painted with anti-corrosion paint.
  • The air side of the coil casing is made of 2 mm thick galvanized sheet steel.
  • The coils are available with various fin pitches in sizes up to 8 x 2,4 m for horizontal air flow, in the standard version.
  • To special order, the connection flanges of the casing can be provided with 15 x 24 mm mounting holes.
  • The DN 32 and DN 50 nom. pipe size connections are threaded, whereas pipe connections larger than DN 50 are designed for welding to the connecting pipework.
  • Plugged connections are provided for venting and drainage. 
  • The design conforms with the Pressure Equipment Directive 97/23/EC.
  • All the components of the product conform to Corrosion Resistance Category C2 in accordance with ISO 12944.
  • Max operating pressure: 1.6 Mpa at max operating temperature100 °C.
  • All heat exchangers are leakage tested using dry air under water at pressure 2,1 Mpa.

Luvata Heat Transfer Solutions division

Important Notice

On 30th of November 2016, Luvata Heat Transfer Solutions (HTS) Division was purchased by Modine Manufacturing Company. All information on this page is the property of Modine Manufacturing Company.

For the convenience of customers, these pages will continue to be hosted by Luvata while transition work continues.

These pages will transfer to www.modine.com on 31th May 2017.

Visit www.modine.com for more details.

Copyright © 2017 Luvata. All rights reserved.